• Liverpool One Liverpool One
    Anodised aluminium interlocking soffit tray system and secret fix copings over canopied walkway at basement, ground and upper levels in main shopping complex.
  • Emirates Stadium Emirates Stadium, London
    Mill finish aluminium interlocking soffit tray and bullnose fascia system to pitch side and external elevations.
  • Queens Hospital Queens Hospital, Romford
    Polyester powder coated aluminium fascias, soffits, secret fix coping and louvres to external elevations.
  • Bury, The Rock Bury, The Rock
    Aluminium shingles, curved copings, ACM fascias and column casings
  • Victoria Gate Victoria Gate, Leeds
    Plasmet PR-600 tongue and groove aluminium rainscreen system with 20mm vertical and horizontal joints.
  • Albion Riverside Albion Riverside, London
    360 linear metres of facetted powder coated aluminium bullnose fascias with secret fix joint
Technical Information / Anodising Specifications

Anodising for architectural applications requires a very consistent finish over large surface areas with lifetime durability. This requires metal of the highest quality with guaranteed gloss ranges to ensure a consistent finish. Plasmet uses Novelis J57 grade aluminium sourced from ISO 9001 registered companies for anodising applications. Finishes are produced to comply with EN12373, BS 3987(1991) and with the European Qualanod standard.

The thickness of the coating is typically between 15 to 25 microns, however this can be thicker if specified. Anodising can be applied to a wide range of material finishes including brushed, hammered, stucco, tread plate, expanded mesh and perforated sheets. With a wide range of colours available including natural, champagne, gold, bronze, black, blue-grey, Sandalor colours and custom effects using differentiated anodising layers.

Anodised treatment gives a durable finish. For the best long-term performance anodised finish should be cleaned at maximum 6 month intervals. For harsh industrial enviroments, cleaning should be carried out every 3 months.

The colour references listed below show some of the colours and finishes available for anodising. Please note, colours and finishes shown below may vary slightly from the swatches displayed. You should also be aware that your monitor setup may have an influence on how the colours are displayed on this website.

ANOLOK® FINISH


 

 

 

 

 

 
Anolok 54b Anolok 541 Anolok 543 Anolok 545 Anolok 547 Anolok 549

STANDARD FINISH


 

 

 

 
Regency Gold 1 Regency Gold 2 Regency Gold 3 Natural